Strip Punching
All strips come with standard punching. Standard punching is on 2" centers with first hole center 1" from side edge. If another type of punch is required, please specify by number of holes, hole-center to hole-center distance, and distance from strip edge to center of first hole.
Do I need Standard or Low-Temp or Ribbed?
Standard Coolers or applications above 32° F
Low-Temp/USDA Freezer Negative 20° F to 32° F or applications requiring USDA approval
Ribbed (Standard or Low-Temp) High traffic doorways - normally defined as 100+ trips through door per day including motorized traffic
Suggested Strip Width Recommendations
6"x.060 Recommended for personnel doors only, such as walk-in coolers and freezers up to 84" in height.
8"x.080 Recommended for areas where light fork lift activity requires greater strength and durability with heights between 84" to 120".
12"x.120 Recommended for doors from 102" to 180" in height and in areas of heavy fork lift activity.
16"x.160 Recommended for exterior and interior doors from 144" to 216" in height and in areas of heavy fork lift activity.
Over 100 different widths, thicknesses and color combinations to suit your particular application.